Demo: Automotive Plastic Clip Orientation
| Part Name | Automotive plastic clip |
|---|---|
| Part Material | PA66 with glass fiber |
| Part Dimensions | 18 x 11 x 7 mm |
| Part Weight | 0.86 g |
| Target Feed Rate | 120 pcs/min |
| Actual Feed Rate | 110-118 pcs/min |
Feeding Challenge
Lightweight clips bounced inside the bowl and required gentle orientation to avoid surface marks.
Required Orientation
Clip opening facing forward, flat side down, stable pitch before robotic loading.
Solution
Lightweight clips bounced inside the bowl and required gentle orientation to avoid surface marks.
The tooling concept combines controlled vibration, mechanical orientation and buffer detection so the downstream station receives stable single-piece output.
Equipment Used
Low-amplitude bowl feeder
Soft-contact sorting tooling
Sensor buffer track
Result
The low-amplitude design maintained part appearance while delivering steady orientation for robotic handling.
Demo Video
Need a Custom Feeding Solution?
Send your part drawings, photos, or samples. Our engineers will review the requirements and provide a practical feeding solution.
Request a Custom Solution →